What’s the process of a boost controller? This is a frequently asked question at Turbosmart, and this article will tell you all you need to know about boost controllers for your turbo setup.

The tried-and-true Boost Tee you’ve grown to love has been given a makeover with Turbosmart’s All-New Boost Tee. The brand-new Boost Tee has an ergonomic design that is 33% smaller. It includes the same features that make it a favourite among users, such as our special Gate Mechanism for maximum boost response and an intuitive anti-tamper locking feature.

What functions do Turbosmart boost control tees perform?

The Boost Tee is an internal and external wastegate system-compatible pneumatic bleed valve that permits boost to be increased in turbocharger systems with boost-based actuators.

By changing the reference signal to an internal or external wastegate actuator, one can raise the boost above and beyond the basic spring pressure. Boost pressure increases of 100 to 200 per cent over the base spring pressure are typical.

The boost level can be set and secured against manipulation using our well-proven detent system, which allows the controller to increase the boost in clearly defined increments.

The Brandl-New Boost Tee by Turbosmart, which is made in Australia from High-Grade Brass and Billet Aluminum, is a reliable option for easy boost adjustment and maximum response. The best value modification for your turbocharged engine is the brand-new Boost Tee from Turbosmart.

Features 

• Smaller and lighter
• Reliable, tried-and-true detent system
• Proven Detent System for Simple & Defined Control, 
• Elegant, Small & Light Design, Design Patent, Widely • Used in Performance Engines (Pending).

Benefits 

• No matter how high you ride, you may modify the boost levels using this controller. For instance, the air is denser when you’re riding at sea level, which can lead to turbo over boosting and overrunning. As a result of the less dense air at high altitudes, greater boost pressure is needed to generate the same amount of horsepower as at lower altitudes. With the Boost Tee Controller, you can adjust the boost to maintain the same horsepower at any altitude.
• Using two different fuels also makes it quick and simple to change your boost. You can reduce the boost if you want to utilise 91 octane fuel one day. The boost can then be readily increased the following day if you want to use full-race gasoline or a 50/50 mix.

How does it work?

• The Boost Tee Controller will be installed between the reference line, the boost reference line, and the line connecting the reference to the wastegate, allowing it to bleed off any excess pressure entering that line into the atmosphere. The Boost Tee Controller does this to trick the wastegate into believing that it is not creating the pressure that it is supposed to.
• For example, if your wastegate is set to 6 psi and you want to increase your boost pressure, insert the Boost Tee Controller, which will bleed off and trick your wastegate into thinking it is only producing 4 lbs. of boost when it is producing 6 lbs. The wastegate is currently producing 8 to 10 psi.

The amount of boost t provides:

A variable boost will be applied. Your system gains 1 lb. of boost when you add the Boost Tee Controller. Although it will depend on the elevation you are riding at, you can apply more boost. With the Boost Tee Controller’s adjustability, you may achieve a boost of 4 to 6 pounds.

The Boost Controller’s Main Purpose: If so, the boost controller must precisely alter the pressure signal the wastegate actuator receives by venting a variable amount of pressure, causing the turbo to generate the new, higher boost level.